RAVENOL UTTO CVT Fluid is a combined transmission and hydraulic oil for agricultural, forestry and construction machinery. It is a special developed universal oil which can be used in combined hydraulic and transmission systems as well as in wet brakes in modern machines. High quality base oils and selected additives guarantee trouble-free operation of all aggregates at at any seasons.
RAVENOL UTTO CVT Fluid offers a wide range of applications as it meets a large number of specifications.
Application Note
RAVENOL UTTO CVT Fluid was specially developed for use in CVT transmissions and therefore offers optimized friction behavior and maximum wear protection.
RAVENOL UTTO CVT Fluid is suitable for wet brakes in powershift clutches and auxiliary drives.The product is not suitable as an engine oil.
Characteristics
- a very high stable viscosity index for year-round use
- a very low pour point
- a high oxidation stability
- protection against corrosion and wear
- a convenient coefficient of friction during running brakes in oil bath (wet brakes) of load changecouplings and minor drives
- zincfree formulation
- very good water tolerance in the hydraulic and transmission circuit
Карактеристике
| Параметар | Вредност | Надгледање |
|---|---|---|
| Основни број, мгКОХ/г | 2.38 | ASTM D2896 |
| Садржај сулфатног пепела, %wt. | 0.3 | DIN 51575 |
| Волатилност NOACK, % | 8 | ASTM D5800 |
| Brand | RAVENOL | |
| Погодан за | Argo VT-DRIVE, Case ICH CVXDrive, Fendt Vario CVT Transmissions, New Holland CVT | |
| У складу са производима | Sauer Sunstrand/ Danfoss (hydrostatic trans fluid) | |
| Боја | Light brown | visual |
| Формирање пене И на 24°Ц, мл/мл | 10/0 | ASTM D892 |
| Формирање пене ИИ на 93,5°Ц, мл/мл | 20/0 | ASTM D892 |
| Формирање пене ИИИ од 24°Ц до 93,5°Ц, мл/мл | 10/0 | ASTM D892 |
| Вискозност на 100°C, мм²/с | 9.3 | DIN 51562-1 |
| Вискозност на 40°C, мм²/с | 56.4 | DIN 51562-1 |
| Индекс вискозности VI | 147 | DIN ISO 2909 |
| Испитивање на машини за трење са четири кугле (хабање), мм | 0.5 | DIN EN ISO 20623 |
| Густина на 20°Ц, г/цм³ | 863.3 | EN ISO 12185 |
| Температура паљења, °Ц | 230 | DIN EN ISO 2592 |
| Тачка стињавања, °Ц | -42 | DIN ISO 3016 |